Sheet Metal Connector Link Plate

Sheet Metal Connector Link Plate
Details:
Frame joints are judged by how little the connector shows. A Sheet Metal Connector Link Plate joins members of a profile or tube frame: L-shaped plates tie two profiles at a corner, U-shaped plates wrap a meeting point of beams, and custom adapter plates bridge non-standard spacing or mismatched tube sizes. Blanking and bending happen in one integrated setup so holes and bend lines keep their relative position, and the outline follows the profile tightly instead of standing proud. Bolts pass through stacked members cleanly, and the finished seam sits neat and aligned after assembly rather than leaving a loose visible gap. Zinc or nickel finishes protect the joined frame from rust, making this connector link plate a discreet reinforcement for display, equipment and tubular frames.
Send Inquiry
Description
Send Inquiry
03986458-436a-4273-9f11-51c479140615

 

Frame joints are judged by how little the connector shows. A Sheet Metal Connector Link Plate joins members of a profile or tube frame: L-shaped plates tie two profiles at a corner, U-shaped plates wrap a meeting point of beams, and custom adapter plates bridge non-standard spacing or mismatched tube sizes. Blanking and bending happen in one integrated setup so holes and bend lines keep their relative position, and the outline follows the profile tightly instead of standing proud. Bolts pass through stacked members cleanly, and the finished seam sits neat and aligned after assembly rather than leaving a loose visible gap. Zinc or nickel finishes protect the joined frame from rust, making this connector link plate a discreet reinforcement for display, equipment and tubular frames.

 

Frame connectors are judged by how invisible the joint looks, so we match bend angle, hole position and plate outline to your existing profile spacing from the drawing or sample. Coaxiality of <=0.1 mm lets bolts thread cleanly through stacked members, and the <=0.2 mm joint gap removes the loose, visible seam that makes cheap frames look unfinished. Overall dimensions, bend style, hole size and tensile load are customized per frame, so the link plate reinforces the splice without sticking out past the profile. Because the plate hides behind the profile, accurate fit matters more than decorative styling, and a flush joint is the visible quality cue buyers notice; the matched outline also makes assembly faster because no trimming or trial-and-error fitting is needed on site.

eeeeb478-ddc4-493c-a28c-318f693ed42c

Specifications

 

Parameter

Specification

Material

SPCC, 304 stainless steel

Thickness

1.0-3.0 mm

Forms

L-shaped, U-shaped, custom adapter plates

Process

Integrated punching and bending

Hole position coaxiality

<=0.1 mm

Joint fit clearance

<=0.2 mm

Surface treatment

Zinc plating, nickel plating

 

Applications

 

Profile frame corner joints: L-shaped plates with coaxial holes let bolts pass cleanly through stacked corner members.

Three-way multi-member nodes: U-shaped or custom adapter plates join several profiles at one meeting point.

Frame reinforcement splices: <=0.2 mm joint gap and zinc/nickel finish give a neat, rust-resistant seam for display and equipment frames.

 

Customization

 

Overall dimensions, bend style (L/U/custom), hole size and tensile load are customized to your drawing; SPCC or 304 material and zinc or nickel plating selected per environment.

 

Packaging & Transportation

 

Plates are wrapped to protect plating, layered in cartons with padding and palletized for bulk orders to prevent bending in transit. EXW, FOB and DDP terms are supported.

 

FAQ

 

Q: Can you manufacture based on our technical drawings or a sample?

A: Yes. Send the frame drawing, profile dimensions or a sample plate, and we produce to the matching hole pattern and bend geometry.

Q: How do you control product quality?

A: A dedicated inspector checks hole coaxiality, bend angle and joint gap against the drawing before packing; third-party inspection is accepted.

Q: How do you ensure on-time delivery?

A: We check the production plan regularly and report progress on schedule, keeping orders on the agreed delivery date.

 

Hot Tags: sheet metal connector link plate, China sheet metal connector link plate manufacturers, suppliers, factory, custom industrial metal components, industrial metal collars, industrial metal holders, industrial metal mounting components, industrial mounting components, luminium industrial components

Send Inquiry