• Deep Drawn Custom Steel Pressing Component
    For an enclosure that has to be clean and seam-free, a deep drawn custom steel pressing component turns flat sheet into a seamless one-piece shell, forming cups, housings, covers and pockets...
  • Table Chair Frame Corner Connecting Bracket
    A table chair frame corner connecting bracket locks the members of furniture together at a right angle, giving the table top, chair frame or cabinet panel a rigid corner that does not rack or...
  • Gold Plated Beryllium Copper Contact Finger
    A gold plated beryllium copper contact finger maintains a steady, low-resistance electrical contact across repeated deflection, so a seam or terminal keeps conducting rather than losing contact...
  • Flat Stamped Sealing Shim Washer
    Where mated components must meet a measured clearance, a flat stamped sealing shim washer sets that precise gap and keeps the fastening seated tight under vibration and load, instead of leaving...
  • Progressive Die Pressed Angle Bracket
    A progressive die pressed angle bracket gives equipment frames a rigid, one-piece mounting point where a welded angle or a loose clevis would otherwise be used. Purchasers look for a bracket that...
  • Bed Frame Support Riser Leg
    A bed frame support riser leg carries the weight of a frame from the structure down to the floor, keeping the furniture level and settled rather than letting one corner sink or tilt under use....
  • Stamped Steel Locating Catch Retainer
    Assembly lines that place a component in the exact same position on every cycle rely on a stamped steel locating catch retainer to index the part and then hold it captive. Purchasers look for a...
  • Spring Stamped Metal Snap Clip
    A spring stamped metal snap clip answers the need for a cover or panel that goes on and off by hand, without tools, screws or a threaded fastener. Purchasers look for a clip that snaps into its...
  • 304 Stainless Steel Fixing Plate
    A 304 stainless steel fixing plate solves the everyday mounting problem of holding two parts or panels steady against a frame without letting the joint creep or wobble. Purchasers choosing this...
  • Steel Splice Connector Plate
    When two structural sections have to be joined into one continuous member, the steel splice connector plate provides a flat, bolted bridge that carries mechanical load across the joint instead of...
  • Deep Drawn Metal Pressing Component
    A deep drawn metal pressing component is a seamless shell formed by pulling flat sheet into a die under controlled draw ratios, producing cups, housings, covers and pockets without a welded seam....
  • Furniture Corner Joint Angle Bracket
    A furniture corner joint angle bracket is a punched and bent connector that rigidly ties furniture members - table tops, chair frames and cabinet panels - at right angles. It is stamped from SGCC...
First 123 Last

As one of the most professional metal stamping parts manufacturers and suppliers in China, we also support customized service. Welcome to wholesale bulk high quality metal stamping parts in stock here from our factory. If you have any enquiry about cooperation, please feel free to email us.

industrial stamped metal parts, precision stamped metal parts, steel stamping components
Send Inquiry