
A Bracket That Stays Stable Under Load
This part is designed as a cantilever structure for most applications. One end mounts to the machine or workbench, while the other end supports a tool or workpiece. Cantilever structures are prone to deflection under excessive loads, so deformation control is a key design consideration.
We address this issue through structural reinforcement using precision bending and embossed ribs. The rib location and depth are determined through calculation based on load conditions and structural requirements. This approach provides high rigidity while adding minimal additional weight.
The single cantilever arm load capacity ranges from 50 to 600 kg. Under its rated load, the arm maintains structural stability with controlled deflection.
We recently manufactured this bracket for an automotive parts factory. The customer needed to mount a 200 kg fixture on a 400 mm long arm. We increased the arm thickness, added deep reinforcement ribs, and applied stress-relief treatment after fabrication. During load testing, the measured deflection was only 0.2 mm. The customer installed the fixture and confirmed that no additional leveling adjustment was required.
That is what a reliable Metal Support Bracket for Tooling Equipment should provide: stable support, improved efficiency, and reduced setup errors on the shop floor.
Precision Alignment and Durable Surface Protection
We inspect every locating hole on this bracket. The pin holes must maintain accurate alignment, with coaxiality controlled within 0.1 mm or less. Misaligned holes can cause incorrect fixture positioning and affect machining accuracy.
The top surface also requires precise flatness. We maintain flatness within 0.2 mm to ensure that tools remain level and stable during operation.
Material options include heavy-duty SPCC steel and 304 stainless steel. SPCC provides reliable strength at a competitive cost, while stainless steel is suitable for damp or clean environments due to its excellent corrosion resistance.
Material thickness ranges from 2–5 mm, with additional reinforcement added to high-stress areas.
The surface is finished with a durable powder coating that provides wear resistance and protects the bracket from scratches and surface damage during long-term use.
Height, angle, and clamping positions can be customized to meet different tooling requirements. This flexibility allows the Metal Support Bracket for Tooling Equipment to adapt to different shop floor applications. Complex samples typically require 5–10 days for production.

Technical Specifications
|
Parameter |
Standard Specification |
Custom Range |
|
Material |
Heavy-duty SPCC, 304 stainless steel |
Selected according to requirements |
|
Thickness |
2–5 mm |
Local reinforcement available |
|
Single Cantilever Arm Load Capacity |
50–600 kg |
Calculated according to application requirements |
|
Pin Hole Coaxiality |
≤0.1 mm |
Can be further tightened |
|
Table Surface Flatness |
≤0.2 mm |
Can be further tightened |
|
Surface Treatment |
Wear-resistant powder coating |
Customized according to requirements |
Hot Tags: metal support bracket for tooling equipment, China metal support bracket for tooling equipment manufacturers, suppliers, factory, cnc machined parts, cnc milled components, cnc milled parts, high precision machined components, machined metal parts, stainless steel cnc machined components
