
When a machine has to stand at a set height, line up with a production line or carry a heavy load off the floor, an equipment support stand sheet metal frame provides the welded base that lifts and locates it. Built as a welded structural frame, it raises the equipment onto a precise mounting datum rather than letting it sit on blocks or improvised supports, and locating pin holes and threaded mounting points put the machine on a repeatable position every time it is installed. The frame can be arranged in tiers, extended to reach the required height, or paired with a shock-isolating base where vibration separation matters, and its surface finish suits a workshop, warehouse or outdoor station. Reinforcement follows the actual equipment weight rather than a generic size, so the stand carries what sits on it without wandering out of alignment. Buyers order this frame when they need a stable welded stand to elevate and position machinery, repeat the same mounting datum on every install, and separate vibration or divide equipment into vertical tiers.
A welded stand is bought as a precision load-bearing datum, where residual weld distortion would shift the equipment mounting holes. Frames are fully welded and then stress-relieved from the customer's drawing, so flatness and verticality stay within tolerance and the +/-0.12 mm mounting-hole positions match the equipment base; the stand bolts up without reaming whether the rated load is 300 kg or 1,500 kg-plus. Because the same welding sequence and stress-relief cycle repeat across the run, frames from different batches interchange on the equipment line without re-checking the mounting datum.

Specifications
|
Parameter |
Specification |
|
Material |
Thick SPCC plate / rectangular tube + sheet metal / SUS304 square tube |
|
Sheet thickness |
1.5-3.0 mm |
|
Square tube |
20x20 / 30x30 / 40x40 / 50x50 mm; wall 1.5-4.0 mm |
|
Welding |
Full welding + post-weld stress relief |
|
Flatness / verticality |
<=0.3 mm/m and <=0.2 mm/500 mm |
|
Load rating |
300 kg light / 800 kg medium / 1,500 kg+ heavy |
|
Mounting hole position |
+/-0.12 mm |
|
Surface |
Whole powder coat / galvanized / stainless pickled-passivated |
Applications
Equipment elevating and locating frames: locating pin and threaded holes at +/-0.12 mm put equipment on a precise datum for repeat installation.
Heavy machinery stands: stress-relieved fully welded frames hold 1,500 kg+ without distorting the mounting plane.
Multi-tier or extendable support structures: layered frames and shock-absorbing mounting bases integrate where equipment needs isolation or vertical zoning.
Customization
Multi-tier, extendable or shock-isolating frame structures, square tube size and wall gauge, reinforcing layout to the required load rating, mounting datum faces, and surface finish, all to customer drawings.
Packaging & Transportation
Welded frames are crated with contact-point protection per product specification to preserve coated surfaces and mounting faces, with dedicated pre-dispatch inspection; third-party inspection accepted. EXW, FOB or DDP.
FAQ
Q: How do you ensure on-time delivery?
A: We check the production schedule regularly and report production status on time.
Q: Can I receive regular production updates (photos or videos)?
A: Yes, photos or videos are provided on request during production.
Q: What is the delivery time for custom-made products?
A: Custom frames take 10-15 days; repeat orders are delivered faster.
Hot Tags: equipment support stand sheet metal frame, China equipment support stand sheet metal frame manufacturers, suppliers, factory, aluminium sheet metal parts, sheet metal assemblies, sheet metal enclosure components, sheet metal machinery components, sheet metal mechanical parts, sheet metal spacers
