Galvanized Joining Mending Plate

Galvanized Joining Mending Plate
Details:
The Galvanized Joining Mending Plate is a heavy-gauge flat connector built for splices that carry more load than a standard thin plate can manage. It is punched from thickened SPCC or SUS304, with alloy steel and conductive phosphor bronze selectable for specific duties. Standard thickness is 1.5–3.0 mm and can be extended to 1.0–5.0 mm for wider, heavier builds. Beyond plain through holes, the plate can take counterbore holes, oval holes and locating holes; counterbore depth is held to ±0.05 mm so screw heads sit flush after fastening. The plate delivers an ultimate tensile strength of at least 120 kg, up-ratable for heavier equipment. Corrosion protection is a black zinc sealed coating 12–16 μm rated to 96 h neutral salt spray, with outdoor powder coating or stainless polishing available as alternatives.
Send Inquiry
Description
Send Inquiry

13c1a1f6-e2f9-41b6-83bd-cfea726ba538

 

The Galvanized Joining Mending Plate is a heavy-gauge flat connector built for splices that carry more load than a standard thin plate can manage. It is punched from thickened SPCC or SUS304, with alloy steel and conductive phosphor bronze selectable for specific duties. Standard thickness is 1.5–3.0 mm and can be extended to 1.0–5.0 mm for wider, heavier builds. Beyond plain through holes, the plate can take counterbore holes, oval holes and locating holes; counterbore depth is held to ±0.05 mm so screw heads sit flush after fastening. The plate delivers an ultimate tensile strength of at least 120 kg, up-ratable for heavier equipment. Corrosion protection is a black zinc sealed coating 12–16 μm rated to 96 h neutral salt spray, with outdoor powder coating or stainless polishing available as alternatives.

 

For a heavy mending plate the buyer's core risk is whether a thicker, higher-strength part still locates correctly under load. Drawing-based tooling matches every hole type and the counterbore depth to the mating joint, so thicker material does not come at the cost of poor fit. Because the same tooling family can step the thickness from 1.5 mm up to 5.0 mm, a buyer can scale one proven splice design to a heavier machine or outdoor frame instead of starting the interface over each time.

360f34fa-3597-48b4-a4e7-60f2cf081d37

Specifications

 

Parameter

Specification

Material

Thickened SPCC / SUS304; alloy steel, phosphor bronze optional

Standard thickness

1.5 / 2.0 / 2.5 / 3.0 mm; 1.0–5.0 mm heavy customization

Hole types

Through, counterbore, oval, locating; counterbore depth ±0.05 mm

Ultimate tensile

≥120 kg, strength-upgradeable

Surface

Black zinc sealed 12–16 μm; outdoor powder coat / stainless polish options

Salt spray

96 h no red rust

Structure

Splice geometry, bends, extended widths fully custom

 

Applications

 

Heavy machinery and vibration-exposed frames - the ≥120 kg tensile rating and thick gauge keep a mended joint tight under repeated shock and cyclic loading.

Outdoor steel structure splicing - the black zinc sealed finish and 96 h salt-spray rating resist atmospheric corrosion on exposed frames and supports.

Flush-head panel and equipment joints - controlled counterbore depth lets screw heads sit flush, which matters on cleanable or access covers.

 

Customization

 

Thickness 1.0–5.0 mm, hole type (through / counterbore / oval / locating), splice and bend geometry, extended length and width, surface (black zinc, outdoor powder coat, stainless polish); developed from customer drawings and samples; OEM / ODM.

 

Packaging & Transportation

 

Thicker plates are stacked with edge protection and desiccant where needed, packed in strong export cartons and palletized for heavy shipments; a dedicated inspector reviews each lot, with 100% inspection depending on the product. Trade terms: EXW, FOB or DDP.

 

FAQ

 

Q: Can you make heavy-duty thicker versions of the mending plate?

A: Yes. Thickness runs up to 5.0 mm and tensile strength can be raised for heavier equipment; both are set from your load requirement and drawing.

Q: How long is the standard and custom delivery?

A: Standard products are completed in about 7–10 days, custom-made products in 10–15 days, and repeat orders are faster.

Q: What is the payment term?

A: The standard term is 30% deposit with 70% balance; custom orders use 50% deposit against 50% balance.

 

Hot Tags: galvanized joining mending plate, China galvanized joining mending plate manufacturers, suppliers, factory, metal forming components, metal stamping components, metal stamping washers, progressive metal stamping parts, stamped metal retainers, stamped metal washers

Send Inquiry