Sheet Metal Frame

Sheet Metal Frame
Details:
The Sheet Metal Frame is manufactured using a full welding process, rather than spot welding. All joints are continuously welded to ensure structural integrity and overall rigidity of the frame. This approach significantly improves load distribution and long-term stability under heavy mechanical stress.
Send Inquiry
Description
Send Inquiry

836fc7cc-8ea1-4b28-95d9-5c4ed23ce296

Full Welding Structure with Stress Control Design

 

The Sheet Metal Frame is manufactured using a full welding process, rather than spot welding. All joints are continuously welded to ensure structural integrity and overall rigidity of the frame. This approach significantly improves load distribution and long-term stability under heavy mechanical stress.

After welding, a stress-relief annealing process is applied. Welding heat introduces internal stress into the metal structure, which can lead to gradual deformation over time if not properly treated. Annealing removes this residual stress and helps maintain dimensional stability during long-term operation.

Flatness is controlled within 0.3 mm per 1 meter, while perpendicularity is maintained within 0.2 mm per 500 mm. These tolerances ensure that the frame remains structurally accurate even under heavy load conditions.

In one industrial application, frames were used to support equipment weighing up to 1.2 tons. After reinforcement design and load testing, the structure successfully met operational requirements without deformation or instability.

Connection plate thickness ranges from 1.5 mm to 3.0 mm, while square tube dimensions range from 20×20 mm to 50×50 mm, with wall thickness options from 1.5 mm to 4.0 mm depending on load requirements.

Each Sheet Metal Frame is engineered to maintain structural shape and rigidity under continuous heavy-duty operation.

Load Capacity and Surface Protection Systems

 

Three standard load levels are available:

Light-duty: up to 300 kg

Medium-duty: up to 800 kg

Heavy-duty: 1500 kg and above

Structural reinforcement can be further customized depending on application requirements. Mounting systems such as locating pin holes and threaded interfaces are controlled with a position tolerance of ±0.12 mm, ensuring accurate alignment during equipment installation.

Surface treatment options include powder coating and galvanizing. Stainless steel versions undergo acid pickling and passivation for corrosion resistance. Heavy-duty models may also include wear-resistant and anti-corrosion coating systems depending on operating conditions.

Additional structural configurations such as multi-layer frames, telescoping assemblies, and vibration-damping mounting bases can be integrated according to customer requirements.

Sample production time is typically 5–10 days, depending on complexity.

c827ec8b-ab76-485a-99be-d4fda6f91cc0

Technical Specifications

 

Parameter

Standard Specification

Custom Range

Material

SPCC heavy plate, rectangular steel tube

SUS304 square tube, high-strength carbon steel available

Connection Plate Thickness

1.5–3.0 mm

Customizable per requirement

Square Tube Size

20×20 / 30×30 / 40×40 / 50×50 mm

Wall thickness 1.5–4.0 mm customizable

Overall Flatness

≤0.3 mm / 1 m

Tighter tolerances available

Load Capacity

300 kg / 800 kg / 1500 kg+

Reinforced versions available

Surface Treatment

Powder coating, galvanizing

Pickling, wear-resistant coatings available

 

Hot Tags: sheet metal frame, China sheet metal frame manufacturers, suppliers, factory, fabricated sheet metal parts, galvanized sheet metal components, sheet metal electrical components, sheet metal hardware, sheet metal machinery components, sheet metal structural components

Send Inquiry