304 Stainless Steel Fixing Plate

304 Stainless Steel Fixing Plate
Details:
A 304 stainless steel fixing plate solves the everyday mounting problem of holding two parts or panels steady against a frame without letting the joint creep or wobble. Purchasers choosing this part usually need a rigid, square fixing point that braces a panel or bracket in place and protects the connection where moisture or corrosion would attack bare steel. The punched-and-bent plate uses a folded edge to reinforce the clamp rather than acting as a loose flat washer, so the gripped assembly stays stiff once fastened. Stainless grade is chosen for installations where rust resistance matters, while plated steel variants serve cost-sensitive indoor fixing, and an optional surface finish suits humid or exposed locations. Developed from a customer's own outline and hole arrangement rather than a universal standard, the plate is meant to drop into a specific mounting position, keep the connected faces square, and give equipment, fixtures or furniture a dependable anchor that stays put after installation.
Send Inquiry
Description
Send Inquiry
63043b25-1ca8-48ca-8d29-0f4b0dccee81

 

A 304 stainless steel fixing plate solves the everyday mounting problem of holding two parts or panels steady against a frame without letting the joint creep or wobble. Purchasers choosing this part usually need a rigid, square fixing point that braces a panel or bracket in place and protects the connection where moisture or corrosion would attack bare steel. The punched-and-bent plate uses a folded edge to reinforce the clamp rather than acting as a loose flat washer, so the gripped assembly stays stiff once fastened. Stainless grade is chosen for installations where rust resistance matters, while plated steel variants serve cost-sensitive indoor fixing, and an optional surface finish suits humid or exposed locations. Developed from a customer's own outline and hole arrangement rather than a universal standard, the plate is meant to drop into a specific mounting position, keep the connected faces square, and give equipment, fixtures or furniture a dependable anchor that stays put after installation.

 

Buyers of a folded fixing plate care most that the two connecting faces stay square and that the fold does not open up in service. Tooling formed in one stamping stroke controls fold perpendicularity to ≤0.1 mm and keeps bend height and angle consistent from the first piece to the last, so the plate seats flush and the fixing stays aligned instead of rocking. Raising either sheet thickness or fold height inside the same family also lets the same plate geometry be up-rated from light fixing to a higher load point without redesigning the whole interface. Batch-consistent squareness matters on repeat production, because a fold that opens up in service lets the mounted panel shift after installation rather than holding it square.

d27cf3b6-5547-4b12-8204-568fdb26a17f

Specifications

 

Parameter

Specification

Material

SPCC / SGCC hot-dip galvanized; 304 stainless, aluminum, spring steel optional

Standard thickness

1.0 / 1.2 / 1.5 / 2.0 mm; 0.8-4.0 mm custom

Structure

Single-side 90-degree folded-edge reinforcement

Mounting hole

Φ5.2 / Φ6.2 for M5 / M6 fasteners

Single-point compression

≥90 kg, load-upgradeable

Perpendicularity

≤0.1 mm (tighter on demand)

Surface

Yellow zinc 10-15 μm; black zinc / nickel / powder coat options

Salt spray

72 h no rust

 

Applications

 

Equipment and cabinet mounting: the 90-degree folded edge braces a panel against a frame, and the ≥90 kg single-point rating supports steady fixing of enclosures and brackets.

Furniture and fixture fixing: SGCC galvanized material and yellow-zinc finish resist indoor humidity, while the M5 / M6 holes fit standard furniture fasteners.

Outdoor or humid enclosures: the 304 stainless or powder-coat variant protects the fixing edge where bare carbon steel would corrode.

 

Customization

 

Thickness 0.8-4.0 mm, fold height and bend angle, hole count and positions, outline shape, slots and limit features, surface finish (yellow / black zinc, nickel, powder coat), material substitution; fully developed from customer drawings or samples; OEM / ODM supported.

 

Packaging & Transportation

 

Stacked plates are separated and bagged or boxed to avoid scratching the finish, then packed in export cartons with a pallet option; dedicated pre-pack inspection, with 100% inspection where the product calls for it. Trade terms: EXW, FOB or DDP.

 

FAQ

 

Q: Do you support OEM and ODM for the fixing plate?

A: Yes. We support OEM and ODM, and can develop the plate from your technical drawings or samples.

Q: How do you control product quality?

A: A dedicated inspector checks each batch; we also accept third-party inspection, and pre-pack inspection scope depends on the product.

Q: What should I do if the fixing plates arrive damaged?

A: It depends on the case: for small shortfalls we replace directly, and for larger issues we identify the cause first then arrange replacement.

 

Hot Tags: 304 stainless steel fixing plate, China 304 stainless steel fixing plate manufacturers, suppliers, factory, aluminum stamping parts, custom metal stamping parts, metal stamping spacers, precision stamped metal parts, stamped metal clips, stamped metal discs

Send Inquiry