
A furniture corner joint angle bracket is a punched and bent connector that rigidly ties furniture members - table tops, chair frames and cabinet panels - at right angles. It is stamped from SGCC hot-dip galvanized sheet or SPCC cold-rolled steel, with 304 stainless steel offered for outdoor corrosion resistance. The standard furniture thickness is 1.0/1.2/1.5 mm, with 0.8-2.0 mm available for reinforced joints. All units carry standardized M5 and M6 mounting holes that line up with common furniture screws. A single connector set is rated to a combined tensile strength of 90 kg, designed around the EN1727 furniture safety framework, with the load rating upgraded where a specific furniture model demands it. Edges are fully chamfered so no sharp corner remains against the wood or the user, and a 72-hour neutral salt-spray color-zinc finish keeps indoor and covered outdoor joints rust-free; powder coating is offered for patio and outdoor furniture, with color and corrosion grade chosen per project. Connectors are developed as matched sets dedicated to tables, chairs and cabinets, and the combined tensile rating can be raised when a heavier furniture model demands it, with dark zinc, nickel or powder-coat finishes chosen to match the furniture's hardware.
Furniture buyers usually source brackets in matched sets across tables, chairs and cabinets, where hole alignment against the wood screw layout is the real purchase risk. Drawing-based in-die production fixes the M5/M6 hole spacing and bend height to the specific furniture panel, and forming the reinforcement flange in the same die keeps every bracket in the set dimensionally consistent - so the entire furniture range assembles without reaming, missing holes or uneven bends.

Specifications
|
Parameter |
Specification |
|
Material |
SGCC hot-dip galvanized / SPCC (304 stainless for outdoor) |
|
Thickness |
1.0 / 1.2 / 1.5 mm (0.8-2.0 mm heavy duty) |
|
Mounting holes |
M5 / M6 standard furniture screws |
|
Tensile strength (per set) |
>=90 kg |
|
Safety framework |
EN1727 furniture safety design |
|
Surface |
Color zinc, 72 h salt spray (powder coating for outdoor) |
|
Edges |
Fully chamfered, no sharp corners |
Applications
Indoor tables, chairs and cabinet frames: standardized M5/M6 holes match common furniture screws, letting the bracket lock wooden panels at 90 degrees without secondary drilling.
Outdoor and patio furniture: 304 stainless or powder-coated versions resist 72-hour salt-spray exposure, so connectors survive covered-outdoor humidity without corroding the wood.
Flat-pack and knock-down furniture: matched sets with consistent hole spacing and chamfered edges protect end users during self-assembly and prevent sharp-edge injuries.
Customization
Material substitution (galvanized, SPCC, 304 stainless), thickness 0.8-2.0 mm, non-standard hole sizes and spacing, powder-coat color and corrosion grade, edge chamfer dimensions, and matched connector sets designed for specific table, chair or cabinet models.
Packaging & Transportation
Connectors are packed with anti-collision protection per product specification, with dedicated inspection before dispatch; third-party inspection is accepted. EXW, FOB or DDP shipping terms are available.
FAQ
Q: What is your MOQ (Minimum Order Quantity)?
A: The MOQ depends on the product.
Q: Can I mix different colors or models in one MOQ order?
A: Yes, mixed colors and models are allowed.
Q: What happens if the goods arrive damaged?
A: Handled case by case: small quantities are replaced directly; larger quantities are investigated and replaced.
Hot Tags: furniture corner joint angle bracket, China furniture corner joint angle bracket manufacturers, suppliers, factory, aluminium stamped parts, metal stamping clamps, metal stamping covers, progressive stamping components, stainless steel stamping components, stamped metal rings
